For some products that are slightly troublesome or complicated to install, customers are hoping to provide on-site installation services, which can save a lot of worry. For the purchase of a relatively large forklift battery, the customer certainly wants to install the door. In fact, the installation of the forklift battery does not have any technical content. The overall assembly has been completed before leaving the factory. The current forklift battery is basically used for hanging, side pulling, front pulling, The side forks remove the battery and need to be lifted or pushed out with an additional forklift to secure the four holes with a spreader. At present, in the forklift industry, the replacement or installation of batteries for counterbalanced electric forklifts is usually replaced by driving and electric fork lifting. The lifting method of driving has great limitations. Because the driving is a large lifting tool, the replacement battery can only be used. The designated venue is carried out.
For forklifts that need to work long hours, battery replacement is a necessary matter. Currently, most of the replacement tools for electric forklift batteries on the market are tools for cranes, which can be used in places where battery replacement is available. It is large in nature and has a large tool structure, is difficult to store, and has potential safety hazards. In response to this situation, the structure of the electric forklift battery replacement tool is improved, so that it is suitable for both crane cranes and forklift cranes, while ensuring safety. Minimize the structure of the tool, reduce the production cost and storage cost of the tool, and apply it flexibly to various places where the battery is replaced. As the national requirements for environmental protection and energy conservation continue to increase, industrial vehicles powered by batteries are gradually replacing the original ones. The market demand for fuel-driven vehicles, electric forklifts, electric forklifts, electric pallet trucks, electric tractors and other industrial vehicles is increasing, and more and more customers are purchased. Among them, the battery is used as a power source and as a wearing part. , need to carry out daily maintenance, or may need to be replaced frequently (some work intensity requirements A high place, may require continuous operation, a set of batteries often can not meet the requirements).
The forklift battery replacement tool also has a hoisting portion on the main body of the spreader with the sling and the sling, and a cylindrical crossbar for matching the sling hook at the top of the hoisting portion, and a fork for matching the fork yoke Jack, when lifting the forklift battery, the hook link on the main body of the spreader is fastened to the hanging hole of the forklift battery. If you choose to replace the forklift battery with the crane, you can use the strap to connect the crane and the spreader body to lift the forklift battery; Choosing to change the forklift battery with a forklift can insert the forklift fork into the fork socket to realize the replacement work. Therefore, the forklift battery replacement tool can be applied to both the crane and the forklift, and the use is wider, and the forklift battery The replacement tool can be used to fix the sling on the fixed column of the fork fork when used for the forklift crane to prevent the spreader body from sliding off the fork to damage the forklift battery, and the sling hook can be fastened to the sling when not in use. The hole prevents the shackle from colliding with the forklift battery during the next lifting to cause a short circuit and thus protects, so the forklift battery replacement tool can effectively eliminate the safety existing during use. Risks, has the advantage of high security, electric forklift rely on battery-powered, driven cargo vehicle from the fork, forklift batteries is particularly important in the vehicle, it is also an important part of the cost of electric forklift indivisible.